Test Point is a point on the board of a mobile phone used to activate Test Point or EDL (Emergency Download) mode during repair or software upgrade. The use of Test Point is often done when the phone is bricked (non-bootable condition), or to perform recovery operations, diagnostics, or software installation from firmware.
For Nokia C1 TA-1165, the Test Point may be located at a specific location on the phone board. To identify and use Test Point on Nokia C1 TA-1165, you need to follow these steps:
Turn off the phone: Make sure the phone is completely turned off to avoid risks while performing operations on the board.
Open protection: If there is a protective case or bumper, remove them for easier access.
Find Test Point: Usually, Test Point will be marked on the board or identified through repair instructions or technical documents from the manufacturer.
Use precision tools: To avoid damaging the board, use small and precise tools to reach the Test Point.
Connecting the Test Point: Connect the Test Point using a flat tool or needle, keeping tight contact with the board.
Connect your phone to your computer: After connecting Test Point, connect your phone to your computer using a USB cable. This process is commonly used to switch the phone to EDL mode.
Perform necessary operations: Depending on your purpose, you can perform operations such as loading new firmware, restoring the system, or other repair tasks.
Note that using Test Point should be done carefully and in accordance with the instructions of the manufacturer or mobile phone repair specialist. Using Test Point without knowing how it works can cause serious damage to the phone.
Nếu bạn muốn đặt câu hỏi hoặc thảo luận xin vui lòng đọcở đây! Vui lòng tắt AdBlock hoặc thêm trang web của chúng tôi vào Danh sách trắng để hỗ trợ Mobile Repair Đọc ở đây!Mobile RepairĐiều khoản và Quy tắc
- Lên chương trình giúp bạn định hướng kỹ năng và kiến thức.
- Tay nghề cơ bản, các nội dung ngoại vi.
- Các kỹ năng cơ bản về thao tác mainboar.
- Kỹ năng đo đạc, đọc sơ đồ, vận dụng kiến thức chuyên sâu.
- Xử lý phần cứng iPhone - iPad, sàn main, đóng cặp ...
- Xử lý các pan bệnh chức năng trên nền máy Android.
- Sàn main, đóng cặp các đời máy Android.
- Kỹ thuật ép kính cơ bản, ép cổ cáp cơ bản.
ĐIỀU KIỆN HỌC TẬP:
- Bàn làm việc đầy đủ đồ nghề hiện đại bậc nhất khu vực.
- Kỹ thuật chuyên sâu, bao ra nghề không giới hạn thời gian.
- Free tài liệu, vật tư, công cụ hỗ trợ.
- Có chỗ ở miễn phí cho học viên ở xa.
image quote pre code