Samsung Galaxy A11 SM-S115 Reboot to EDL Mode 9008

Samsung Galaxy A11 SM-S115 Reboot to EDL Mode 9008
Posted by Admin
Your Ads Here

Entering EDL (Emergency Download) mode on Samsung Galaxy A11 SM-S115 can be done through a combination of hardware button presses and the use of a computer with specific software.

Here are the steps to reboot your Samsung Galaxy A11 SM-S115 to EDL mode 9008:

  1. First, make sure that your phone's battery is fully charged to avoid any interruption during the process.
  2. Install Samsung USB drivers on your computer. You can download them from the Samsung website or any reliable source.
  3. Download and install the QPST (Qualcomm Product Support Tool) software on your computer.
  4. Turn off your Samsung Galaxy A11 SM-S115.
  5. Press and hold the Volume Up and Volume Down buttons simultaneously while connecting your phone to your computer via USB cable.
  6. Keep holding the Volume Up and Volume Down buttons until your phone is detected by the computer.
  7. Open the QPST software on your computer and click on the "Ports" tab.
  8. Check if your phone's COM port is listed in the Ports tab.
  9. If the COM port is listed, click on the "Start Clients" option and select "Software Download."
  10. Enter the appropriate EDL mode code for your device, which is 9008 in this case.
  11. Click on "Browse" and select the firmware you want to flash on your device.
  12. Click on "Download" to begin the flashing process.
  13. Once the process is complete, disconnect your phone from the computer and restart it.

Your Samsung Galaxy A11 SM-S115 should now be in EDL mode 9008. Please note that entering EDL mode and flashing firmware can be risky, and any mistake may result in damaging your phone. Therefore, it is advisable to proceed with caution and follow the steps carefully.
Your Ads Here

Your Ads Here

Your Ads Here

Your Ads Here

Newer Posts Newer Posts Older Posts Older Posts

Related Posts

Your Ads Here


Post a Comment
Loading comments...