Each phone comes with different developer options like Recovery mode, Fastboot mode/bootloader mode, and EDL mode. All these modes use to perform different test procedures. Some of them can only be used by advanced Android users or mobile developers or repairers, and some of them can be used by normal users.
Using Test Point Samsung Galaxy S10
Install stock ROM.
Flash without unlocking bootloader.
Installing stock ROM is easy, if device can't boot into fastboot mode or device is stuck on Samsung Logo.
Other ways to enter EDL Mode on Samsung Galaxy S10
Follow the instructions below carefully to boot your device into EDL Mode (Emergency Download Mode)
By Poking Hardware Test Points
In that case, you only have one option left, which is to poke Test Points on the device's mainboard.
Power off the device if possible.
Open the back cover of the phone
Connect 2 test points on the mainboard of the device
And then plug the USB into your PC
Once your Qualcomm Android device has entered EDL mode, you can connect it to your PC and use tools like QPST or QFIL to flash software files to extract or restore the original ROM.
Using Adb Mode
First, install ADB & Fastboot drivers on your PC, then enable USB debugging on your phone.
Now connect your device to PC using USB Driver.
Then open command window in PC and paste the following commands and press enter.
adb reboot edl
If any pop-up appears on phone screen then allow ADB access.
Fastboot mode
Download ADB and Fastboot Tool then extract it in your PC (C:/Drive)
Boot your device into bootloader
Open a command window on your PC on the same unzipped folder (ADB and Fastboot Tools)
Now enter the command
.\fastboot oem edl
TestPoint Samsung Galaxy S10 G973F
Note: Just understand that EDL mode flashing is a common method for all Samsung devices. But EDL startup process may be different for different devices. For some devices you can use EDL start command but the problem is that nowadays edl command doesn't work for all latest Huawei smartphones. So checkpoint is the easiest and most perfect method to boot any Vivo phone into edl mode using test terminals.
Nếu bạn muốn đặt câu hỏi hoặc thảo luận xin vui lòng đọcở đây! Vui lòng tắt AdBlock hoặc thêm trang web của chúng tôi vào Danh sách trắng để hỗ trợ Mobile Repair Đọc ở đây!Mobile RepairĐiều khoản và Quy tắc
- Lên chương trình giúp bạn định hướng kỹ năng và kiến thức.
- Tay nghề cơ bản, các nội dung ngoại vi.
- Các kỹ năng cơ bản về thao tác mainboar.
- Kỹ năng đo đạc, đọc sơ đồ, vận dụng kiến thức chuyên sâu.
- Xử lý phần cứng iPhone - iPad, sàn main, đóng cặp ...
- Xử lý các pan bệnh chức năng trên nền máy Android.
- Sàn main, đóng cặp các đời máy Android.
- Kỹ thuật ép kính cơ bản, ép cổ cáp cơ bản.
ĐIỀU KIỆN HỌC TẬP:
- Bàn làm việc đầy đủ đồ nghề hiện đại bậc nhất khu vực.
- Kỹ thuật chuyên sâu, bao ra nghề không giới hạn thời gian.
- Free tài liệu, vật tư, công cụ hỗ trợ.
- Có chỗ ở miễn phí cho học viên ở xa.
image quote pre code