TestPoint Samsung Galaxy F12 SM-F127G

TestPoint Samsung Galaxy F12 SM-F127G
Posted by Admin
Your Ads Here

By using TestPoint Samsung Galaxy F12 SM-F127G, you can easily restore original ROM, bypass FRP, Remove MDM Passcode Lost Mode (Device Lock, No Downloads Mode, No Recovery) and Remove FRP Direct with Easy Jtag Plus or UFI Box. In this guide we will show you the tested and working image of PinOUT and Test Point for Samsung Galaxy F12.

Removing pattern, password, fingerprint in Samsung Galaxy F12 SM-F127G with UFI Box you can easily solve it with this method if you are a better technician or an experienced technician in related Android software. Regarding if there is a USB not recognized error then your USB is not working. If the battery is not charged, your USB socket will not work properly and you will fail this method. If any problem please write your question in the comment section, I will try my best to help you.

Samsung Galaxy F12 What is ISP Pinout?

ISP stands for "In-System Programming". In-system programming (ISP) allows communication to take place with the target chip without having to remove it. The main advantage of this approach is the ability to communicate with the eMMC of the target chip or the eMCP bypassing the CPU. It gives a higher data extraction rate than JTAG but it requires great soldering skills. ISP applies to forensics, which is the operation of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading the entire contents of a device's memory.

Pinout image of Samsung Galaxy F12 SM-F127G ISP EMMC:

Hardware process:

  1. You need to take the back cover out of your phone. Next, remove the motherboard from the existing battery, fingerprint sensor, and camera.
  2. Remove the screws from the motherboard and take it out and put it in a safe place.
  3. On your motherboard, locate the six eMMC pins: Dat 0, CLK, CMD, GND, VCC, and VCCQ. You will require cutting through the steel shell to reveal them.
  4. Take the UFI box and take the adapter out of it. You will see the exact same pins in the adapter I mentioned in the previous step.
  5. Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
  6. Place the adapter inside the UFI box. Connect the box to the computer.
  7. Connect the motherboard to the phone's battery. Then put the USB cable in the phone and connect it to the computer.

TestPoint Samsung Galaxy F12 SM-F127G

Repair Samsung Galaxy F12 dead boot or any brand phone you need two of the best protectors on the market, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong software not showing start up on screen. This you need those boxes for boot repair. Some brands, can't remove the key like lock, pattern, password, FRP, and MDM this lock actually support to remove the lock.

How to remove Samsung Galaxy F12 FRP Lock with UFI Dongle:

  • Run the UFi Box software.
  • Select "Direct eMMC (ISP)"
  • Now, click Identify eMMC. It will recognize your device by software to go further
  • Go to the User Partition tab and click Special Task. Select Select Factory from the list of options.
  • Remove all connections and assemble your phone back to the way it was. Turn on your phone and enjoy
  • Accomplished.
Your Ads Here

Your Ads Here

Your Ads Here

Your Ads Here

Newer Posts Newer Posts Older Posts Older Posts

Related Posts

Your Ads Here


Post a Comment
Loading comments...